First, we will need a data file, and for the sake of conformity with the question of the commenter, I will just use this

"" France Germany Japan Nauru Defense 9163 4857 2648 9437 Agriculture 3547 5378 1831 1948 Education 7722 7445 731 9822 Industry 4837 147 3449 6111 "Silly walks" 3441 7297 308 7386

(We can already deduce that with the sole exception of Japan, countries spend a large chunk of their GDP on silly walk.)

Now, our first attempt could be this:

reset file = 'marimekko.dat' set style data histograms set style histogram columnstacked set style fill solid border -1 set boxwidth 1.0 set xrange [-1:5] set yrange [0:5e4] plot newhistogram at 0, file u 2 title col, \ newhistogram at 1, file u 3 title col, \ newhistogram at 2, file u 4 title col, \ newhistogram at 3, file u 5 title col, \and it should be quite obvious that this is not what we want:

Let us try to improve on the figure, step by step. First, we will place the histograms in a multiplot, for that will make life a lot easier: this is our only way of manipulating the column width during the plot. In this spirit, our second script will be this:

reset file = 'marimekko.dat' set style data histograms set style histogram columnstacked set style fill solid border -1 set boxwidth 1.0 set xrange [-1:5] set yrange [0:5e4] set multiplot plot newhistogram at 0, file u (f($2)) title col plot newhistogram at 1, file u (f($3)) title col plot newhistogram at 2, file u (f($4)) title col set boxwidth 0.3 plot newhistogram at 2.65, file u (f($5)) title col unset multiplot

This is somewhat better, for the colours are now consistent, and we also see that the last column has a different width. We also see how the positioning works: the right hand side of Japan's column is at 2.5, and since the width of Nauru's column is 0.3, its centre has got to be shifted by 0.15 with respect to 2.5. That adds up to 2.65. However, if we watch closely, we will also notice that the ytics and labels are drawn four times; after all, we have four plots. What, if we unset the ytics after the first plot? Well, we would end up with this

Rather upsetting! The problem is that once the tics are unset, the size of the figure changes, so we can no longer count on the plots' proper alignment. However, there is an easy remedy for this: all we have to do is not to unset the ytics, but to set them invisible. That is, we can do

plot newhistogram at 0, file u (f($2)) title col set ytics (" ", 30000) plot newhistogram at 1, file u (f($3)) title col plot newhistogram at 2, file u (f($4)) title col set boxwidth 0.3 plot newhistogram at 2.65, file u (f($5)) title colwhere we have 6 white spaces in the quote. You might wonder why on Earth 6. Well, the answer is that the label "30000" is actually " 30000", which takes up 6 characters' space. With this trick, we get

We have already achieved quite a lot, and slowly, but surely, we are getting to our goal. Just do not despair!

The next thing that we would need is proper scaling of the columns: we want all of them to be between 0 and 100 (%), i.e., we would have to sum all columns first, and then divide the values by the sum. And that is the snag: we have four columns, and we have to do the summing for each column independently, and before the final plots. Otherwise, our multiplot will be messed up. And this is where the array comes in handy: if we just had an array, and could retrieve values from it, we would be saved. And of course, we can do this. Let us take a small detour!

If we think about it, the array (5, 4, 6, 7, 8) is nothing but a finite series: its first element is 5, second element is 4, and so on. But we could also look at the series as a function: a mapping from the set of natural numbers to, well, to anything. In the example above, to natural numbers. It doesn't matter. My point is that an array is a function, a function for which h(0) = 5, h(1) = 4, h(2) = 6, h(3) = 7, and h(4) = 8. As long as this is true, we do not care what h(1.1) is. We need the function's values only at integer numbers. Then the only question is how we could define this function "on the fly". Being a physicist, and a lazy man, I would propose the following:

g(x,a) = (abs(x-a) < 0.1 ? 1 : 0) h(x) = 5 * g(x,0) + 4 * g(x,1) + 6 * g(x,2) + 7 * g(x,3) + 8 * g(x,4)g(x,a) is (apart from some numerical factors) nothing but a very primitive representation of a Dirac-delta, centred on 'a'. You can convince yourself that h(x) defined in this way fulfils the requirements above.

After this digression, let us see what we can do with this, and issue the following commands!

ARRAY = "h(x) = 0" array(x, counter) = ( ARRAY.sprintf(" + %f*g(x,%d)", x/100.0, counter+1) ) ff(x, counter) = (($0 > 0 ? ARRAY = array(x, counter-1) : 1), total = total + x, x) plot 'marimekko.dat' using 0:(ff($2, 2))At this point, the variable ARRAY should look something like this

ARRAY = "h(x) = 0 + 91.630000*g(x,2) + 35.470000*g(x,2) + 77.220000*g(x,2) + 48.370000*g(x,2) + 34.410000*g(x,2)"and if we evaluate it, the function value h(2) returns the sum of the numbers in the second column. (Apart from a factor of 100, of course.) Note that in order to take out the first line, which is the header, we have to use the condition

($0 > 0 ? ARRAY = array(x, counter-1) : 1)which updates ARRAY only if we are processing the second record, at least. Also note that in order to get the sum of all columns, all we have to do is call this plot as many times as many columns there are. In the light of this, our next script could be this

reset file = 'marimekko.dat' col = 4 g(x,a) = (abs(x-a) < 0.1 ? 1 : 0) ARRAY = "h(x) = 0" array(x, counter) = ( ARRAY.sprintf(" + %f*g(x,%d)", x/100.0, counter) ) ff(x, counter) = (($0 > 0 ? ARRAY = array(x, counter) : 1), x) plot for [i=2:col+1] 'marimekko.dat' using 0:(ff(column(i), i)) set xrange [-1:3] set yrange [0:110] eval(ARRAY); set style data histograms set style histogram columnstacked set style fill solid border -1 set boxwidth 1.0 set multiplot plot newhistogram at 0, file u ($2/h(2)) title col set ytics (" " 20) plot newhistogram at 1, file u ($3/h(3)) title col plot newhistogram at 2, file u ($4/h(4)) title col set boxwidth 0.3 plot newhistogram at 2.65, file u ($5/h(5)) title col unset multiplotand this results in this figure

So, we are almost there: the columns are rescaled, and placed neatly next to each other. The only missing ingredient is the setting of the widths. But that is really easy: we only have to determine what the grand total is, and then scale the columns accordingly. Our script can, then, be modified as follows

reset file = 'marimekko.dat' col = 4 total = 0.0 g(x,a) = (abs(x-a) < 0.1 ? 1 : 0) ARRAY = "h(x) = 0" array(x, counter) = ( ARRAY.sprintf(" + %f*g(x,%d)", x/100.0, counter+1) ) ff(x, counter) = (($0 > 0 ? ARRAY = array(x, counter-1) : 1), total = total + x, x) plot for [i=2:col+1] 'marimekko.dat' using 0:(ff(column(i), i)) set xrange [-0.3:1] set yrange [0:110] eval(ARRAY); set style data histograms set style histogram columnstacked set style fill solid border -1 total = total / 100.0 position = 0.0 set multiplot set boxwidth h(2)/total plot newhistogram at position, file u ($2/h(2)) title col set ytics (" " 20) set boxwidth h(3)/total; position = position + (h(2)+h(3))/total/2.0 plot newhistogram at position, file u ($3/h(3)) title col set boxwidth h(4)/total; position = position + (h(3)+h(4))/total/2.0 plot newhistogram at position, file u ($4/h(4)) title col set boxwidth h(5)/total; position = position + (h(4)+h(5))/total/2.0 plot newhistogram at position, file u ($5/h(5)) title col unset multiplotand this is what we wanted!

Adding labels to the rectangles is relatively easy: we could do the following

plot file using (position):(l($5)):5 with labels tc rgb "#ffffff"where l(x) is a function that keeps track of the previous values of the column, and adds them as new values are processed. The definition of this function should be trivial.

The last thing that I would add here is that by using macros, we can tidy up the script: we no longer would need all those long and repetitive lines. In fact, we could also add another instruction to our 'ff' function, which would generate the plot command. The advantage of that is that in this way, we do not have to repeat the plot commands four times: we simply put that in our for loop, and then evaluate the resulting string. I discussed this trick in my last post, so, if you are interested in the details, you can look it up there.

great!

ReplyDeleteinstead of the ternary operator if 'ff()' you may use the 'every' option in the plot command to skip the first line:

ff(x, counter) = (ARRAY = array(x, counter-1), total = total + x, x)

plot for [i=2:col+1] file every ::1 using 0:(ff(column(i), i))

Thanks for the suggestion, that's a very good point!

ReplyDeleteCheers,

Zoltán

As the perpetrator of the original suggestion, I have to say that this is brilliant (as usual).

ReplyDeleteFor the sake of completeness, Ididn't use the (new)histogram mode in my own solution, I simply plotted boxes, the coordinates of which were calculated and written to a temporary file by a perl script. By plotting the boxes in the correct order they overlap and leave the impression of colored rectangles. As a flourish I added to the plot the values themselves as labels on top of the rectangles.

With this method the category names on the axes can be added with the x(2)ticlabel and the yticlabel functions.

I dare not post the perl program...thing and the accompanying gnuplot script because they are seriously badly written, but anyway, thanks for this version.

It was quite enlightening.

Thanks for the kind words! As it turns out, even in gnuplot, one doesn't have to use newhistogram. The size and position of the plot can now be specified setting the lmargin, rmargin, tmargin and bmargin properties. This renders the hack with set ytics " " 100 unnecessary, and one can also shift the new histograms to the desired position.

ReplyDeleteCheers,

Zoltán

As a newbie with GNU Plot, I was wondering if we can adjust the width of *individual* rectangle of a stack in the histogram, based on data in the input file.

ReplyDeleteYes, I believe that should not be any problem. After all, what happens here is an iterative multiplot: you write to the string whatever you want.

ReplyDeleteCheers,

Zoltán

Great blog!

ReplyDeleteHello, can you help me?

ReplyDeleteI’m trying to make an image of the data obtained from a small radio telescope built. I need to assign a color to each data I got.

The data I get are similar to these:

http://www.nrao.edu/index.php/learn/radioastronomy/makeradioimage

http://www.nrao.edu/whatisra/dsheet1.html

I found this great site and I think that can solve my problem.

Can you help me?

Regards

Rolando Paz

plots in konkan

ReplyDelete